TOPPING D90SE MQA ES9038PRO Bluetooth 5.0 LDAC Full Balancde HIFI DAC DSD1024 PCM768kHz RCA XLR USB IIS CPLD Ultra low noise preamp Decoder
Features
- ESS ES9038 PRO DAC chip, MQA decoding with USB, coaxial, optical, and AES inputs
- Get bit-perfect audio playback without distortion or jitter. The XMOS 16-core XU216 microcontroller converts the highest quality digital files to analog voltage without the timing deviations that cause distortion. Plus, Asynchronous USB audio transfer and CPLD ensure jitter lower than -160dB.
- Ditch the cables, not the quality. Get rich 24-bit Bluetooth 5.0 transmission with support of major lossless codecs: AAC, SBC, APTX, APTX LL, APTX HD, and LDAC.
- Use the D90SE in “DAC + Preamplifier” mode and connect a power amplifier or monitor speakers. Control the output volume on the front panel or with the remote control.
Specifications:
USB IN
PCM: 16-32bit / 44.1 – 768kHz
DSD (Native): DSD64 – DSD512
DSD (DoP): DSD64 – DSD256
MQA: Renderer, MQA, MQA Studio
IIS IN
PCM: 16 – 32bit / 44.1kHz – 768kHz
DSD (Native): DSD64 – DSD1024
DSD (DoP): DSD64 – DSD256
MQA: Not supported
Coax/ Opt/ AES IN
PCM: 16 – 24bit / 44.1kHz – 192kHz
DSD (Native): Not supported
DSD (DoP): DSD64
MQA: Renderer, MQA, MQA Studio
Bluetooth: AAC / SBC / APTX / APTX LL / APTX HD / LDAC
Line out RCA decoding parameters (USB IN @96kHz)
THD+N@A-wt: <0.00007% @1kHz
THD@No-wt 90kBw: <0.0008% @20-20kHz
SNR@A-wt: 127dB @1kHz
Dynamic range @A-wt: 127dB @1kHz
Frequency response
20Hz – 20kHz (±0.1dB)
20Hz – 40kHz (±0.3dB)
Output level
2.1Vrms @0dBFS (4V Mode)
2.6Vrms @0dBFS (5V Mode)
Noise @A-wt: <1.3uVrms
Crosstalk: -124dB @1kHz
Channel balance: 0.3dB
Output impedance: 100Ω
Line out XLR decoding parameters (USB IN @96kHz)
THD+N@A-wt: <0.00005% @1kHz
THD@No-wt 90kBw: <0.0003% @20-20kHz
SNR@A-wt: 134dB @1kHz
Dynamic range @A-wt: 134dB @1kHz
Frequency response
20Hz – 20kHz (±0.1dB)
20Hz – 40kHz (±0.3dB)
Noise @A-wt: <1.1uVrms
Crosstalk: -139dB @1kHz
Channel balance: 0.3dB
Output impedance: 100Ω
